Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
B
Measurement on channel V1
Edit current value according to required setpoint for zero setting. Press the F2 key ("Adjust" when device is ready.
Then press the F3 key ("Continue") to move to the next point.
Edit current value according to required setpoint for gain adjustment. Press the F2 key ("Adjust") when device is
ready. Then press the F3 key ("Done") to end adjustment operation.
Detector adjustment is not supported by every HART device.
NTA47224-300A9
145 / 194
Publicité
Chapitres
Table des Matières
