Backlighting function
Instrument panel backlighting is active only if the parking
light or the low/high beam is on.
In this case the instrument panel automatically turns on or
off the backlighting, thanks to some sensors measuring
light condition and ambient temperature.
Pilot lights brightness function
This function is active only if the parking light or the low/
high beam is on.
Pilot lights brightness is automatically adjusted by the
instrument panel according to the outer light measured.
Auto-off headlight function
This function allows you to reduce current consumption
from the battery, by automatically managing headlight
switching-off.
The device is enabled in two instances:
- If the key is turned from OFF to ON and no attempt is
made to start the engine. After 60 seconds, the
headlight is switched off and will be turned on only
upon the following Key-ON.
- After having used the bike, with headlight on, if the
engine is stopped via the ENGINE KILL switch (2, fig.
22), after 60 seconds from engine stop, the headlight is
turned off and will be turned on upon the following
engine start-up.
Note
While starting the engine, the system switches off
the headlight and turns it back on again after engine has
started, or anyway when the button (3, fig. 22) is released.
E
25