Checking Brake Pads For Wear - Ducati SPORTTOURING ST4s 2005 Manuel D'utilisation Et Entretien

Checking brake pads for wear

MIN
Front brake (fig. 75)
1 mm
To facilitate inspection without removing the pads from
the calipers, brake pads have a wear mark. If the grooves
in the friction material are still visible, the pad is still in good
condition.
Rear brake (fig. 76)
E
The friction material on each pad should be at least
1 mm thick.
Important
Have the brake pads replaced at a Ducati Dealer or
fig. 75
Authorised Workshop.
74