Clock setting function
Hold down button (A, fig. 5.1) for 2 seconds, the wording
AM begins to flash. If button (B, fig. 5.1) is pressed again,
PM begins to flash; press button (B) to go back to previous
step. Press button (A) to confirm and start setting hours
that shall begin to flash.
Use button (B, fig. 5.1) to change hour value. If button (B)
is pressed for more than 5 seconds, fast scroll is activated.
Press button (A) to confirm and start setting minutes. Use
E
button (B) to set minutes. If button (B) is pressed for more
than 5 seconds, fast scroll is activated. Press button (A) to
confirm and exit clock setting mode and go back to normal
operation.
Auxiliary display functions (fig. 9)
Press button (B, fig. 5.1) with the key on ON to scroll down
the following functions, in sequence:
- Odometer
- TRIP meter
- Average speed
- Instant fuel consumption
- Average consumption
- Fuel used
- Range
- Digital fuel level indication
18
ODOMETER
TRIP METER
AVERAGE SPEED
INSTANT FUEL CONSUMPTION
AVERAGE CONSUMPTION
FUEL USED
RAMGE
DIGITAL FUEL LEVEL INDICATION
fig. 9