Turn Indicators - Ducati SPORTTOURING ST4s 2005 Manuel D'utilisation Et Entretien

Turn indicators

The bulbs of the turn indicators are accessible after
removing the instrument panel side guards.
Front:
Turn the bulb holder (1, fig. 86) anticlockwise and
remove it from indicator body. Withdraw the burnt-out
bulb and replace it.
Refit the bulb holder with the round slot pointing upward
and turn it clockwise until it locks in place in the indicator
body.
Rear:
remove the screw (2, fig. 87) and detach the glass (3) from
the indicator body holder.
The bulb is of the banjo-type: press and rotate
anticlockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks. Refit the glass sliding the
small tab (A) into the suitable slot in the indicator body
and tighten the screw (2).
1
OPEN
CLOSED
A
3
E
fig. 86
2
fig. 87
83