Ducati SPORTTOURING ST4s 2005 Manuel D'utilisation Et Entretien page 179

Removing the upper and lower body panels together
Unscrew the 8 fastening screws (3, fig. 63 - fig. 64) that
hold the headlight fairing to the side body panels.
Unscrew the front fastening screw (1, fig. 66) that holds
each body panel to the front baffle.
Unscrew the rear fastening screw (2, fig. 66) that holds
each body panel to the frame.
Unscrew the two lower fastening screws (3, fig. 66)
holding the body panels to the central air conveyor.
Unscrew one of the two screws (4, fig. 66) joining the
body panels together.
Remove the body panels, be careful not to damage the
headlight fairing.
2
4
Side panniers
The motorcycle comes ready to fit the side panniers.
Side panniers kit in the same colour as the motorcycle is
available
from Ducati Spare Parts Department.
Kit includes all parts needed to install the panniers as well
as the relevant instructions.
fig. 65
1
3
fig. 66
69
E