Publicité
Wiring iDock Controller to LiftMaster
Maxum Operator
To prevent possible SERIOUS INJURY or DEATH:
•
ALL Maintenance or servicing MUST be performed by a trained door systems technician.
•
Disconnect electric power (including battery backup if provided) BEFORE performing ANY adjustments or
maintenance.
•
Do NOT reconnect electrical power until instructed to do so.
An accessory providing the door state via output relays is required for the commercial door operator. If your machine
is not equipped with the relay board accessory, part number AUXREL will be needed. See the instructions supplied with
the kit for reference:
Reference Image #1
Set Relay 2 dip switches to Off, Off, On
Set Relay 1 dip switches to Off, On, Off
WARNING
57
Publicité
