Publicité
en
Movement when the contact is switched off
Event:
The system detected movement while the contact was switched off. It
is possible that the D+ cable is disconnected.
Audio signal:
Acoustic signal 2x - repeated for 10 seconds
Corrective measures:
Switch on the engine for 15 seconds and then turn the switch fully off.
If the error does not disappear, contact your retailer. For safety rea-
sons, the system remains disabled.
Level sensor
Event:
There is a problem with the level sensor.
Audio signal:
-
Corrective measures:
Reset the system by starting the engine for 15 seconds and switching
off the contact again, or pressing the leg retract button in the docking
station for longer than 8 seconds. Try to use the system again.
If the error persists, have the retailer check the level sensor and the
sensor connections.
98
4102561_b
Publicité
