Publicité
en
4. On the main menu, select Level System and then click „Settings" (no longer greyed out after entering
the pin code in Step 2) and „Level position".
Then you will enter a manual operating environment with extended functionality.
To correctly calibrate the system, it must be ensured that all four supports come into contact
with the ground. Ensure that all supports come into contact with the ground before starting the
actual calibration process. In manual mode, the extension movement stops for a short period
of time as soon as the activated support pair has made contact with the ground. By pressing
the control button again, the movement then continues.
82
4102561_b
Publicité
