Publicité
Procedure
Material damage due to the vehicle rolling away
Secure the vehicle against rolling away
Apply the handbrake
1. Start manual operation (TCU).
The system starts up and the home screen appears.
2. Go to „Settings", then select „Advanced Settings" and „User Level":
3. The following section requires you to enter your personal PIN code.
INITIAL USER PIN: 2580.
As calibration is a function-relevant step, you will receive cross-function access authorisation accor-
ding to your access level by entering the pin code.
Registration
You will be required to register when you use the system for the first time. This is taken care
of by the retailer or service workshop.
4102561_b
NOTICE!
en
81
Publicité
