Publicité
en
1. To secure a safe levelling process, the operator must check that
there are no persons in the operating area or in the immediate
environment around the vehicle (call upon a second person for
help where necessary) and that there are no obstacles to block
the cylinders' movement.
Click „OK" to confirm a check of the environment has been com-
pleted.
2. Preheat the level sensor. The acceleration sensor compensates
for temperature, i.e. it counteracts an undesired measurement
deviation by heating itself to the temperature at which it was
calibrated.
This step depends on the temperature of the sensor and can be
omitted if the sensor is used again within a short space of time.
Please wait a few seconds.
88
4102561_b
Publicité
