Publicité
PRODUCT DESCRIPTION
LevelM Pro is an electrohydraulic system, made up of two motor/pump units that can operate indepen-
dently of each other. The external gear pumps driven by BLDC electric motors supply four hydraulic
cylinders, which ensure the appropriate levelling and support settings for the vehicle.
The respective levelling/support settings are controlled by a central electronics module. Potential functi-
ons that can be performed are:
Fully-automatic level control
Semi-automatic level control
Waste water tank emptying
Roof drainage
Setting a preferred sleeping position
And many more...
The touch manual operating device (TCU) serves as an operational user interface and it is integrated
inside the vehicle, but can also be removed for operation and for carrying out system updates.
Intended use
The levelling system is used:
– to control vehicle levelling
– to provide support for a stable position
– to set comfort positions
The LevelM Pro is used as both original equipment (OEM) as well as for retrofitting (AS) motorhomes.
The underlying collective load is tailored to the recreational vehicle sector, which is why the system
may only be used here.
Use in surrounding sectors, e.g. in the lightweight commercial vehicle sector (LCV), must be agreed
on with E&P on a case-by-case basis. Installation without prior agreement is considered non-intended
use.
Possible misuse
Risk of injury
Do not use the levelling system as a jack.
The manufacturer assumes no liability for defects or damage caused by:
Failure to observe the instructions and safety information contained therein
Improper installation/conversion
Improper use
Manipulating and changing system components
Using system components and spare parts that have not been approved by E&P
In the event of damage caused by improper installation, all claims under warranty, with particular regard
to those relating to the Product Liability Act, shall be null and void.
4102561_b
WARNING!
en
61
Publicité
