Publicité
Automatic
Use this to level your vehicle fully automatically with the touch of a button. The safety mechanisms
used ensure that the levelling process does not create unstable situations that could damage the user
or the vehicle.
Despite the automatic process, you retain full control and can stop the process at any time by pressing
„Stop".
This mode is suitable in most cases and should therefore be selected as preferred.
Semi-automatic
Semi-automatic mode gives you a little more control. It is used in situations in which individual cor-
rections should be made, e.g. moving into a position that has not been previously saved.
Even in this mode, the safety mechanisms described above are applied, which, among other things,
control the front of the vehicle and the rear of the vehicle independently, at different extension speeds.
Manual
Manual mode gives you full control over the system.
In addition to increased freedom, this mode also involves increased user responsibility, which is why
this mode is only recommended for experienced users. By releasing the movement paths, the safety
mechanisms integrated into the automatic and semi-automatic modes are partially deactivated.
Manual mode is used to give individual supports extra help, for example - if they have sunk into soft
ground.
Automatic mode
From the automatic menu, pre-stored positions can be automati-
cally moved into.
Automatic (level position:):
Main function for levelling the vehicle to a pre-defined levelling
position.
Sleeping (sleep position):
One-sided vehicle adjustment to enable a more comfortable
sleeping position.
Emptying grey water (drainage position):
The vehicle is inclined in a transverse direction so the grey water
tank can be emptied.
4102561_b
en
87
Publicité
