Publicité
en
System - updates
Material damage
Update interruptions can lead to irreparable damage.
Please make sure in advance that the TCU manual operating device battery is sufficiently charged
and do not interrupt the installation process.
On the „System" tab, you can select between update, reset communication and factory reset.
1. Select "Update".
2. Connect your TCU manual operating device to your computer using a USB-C cable.
3. Save the current update for your display in the „Firmware" subfolder.
Mainboard updates must be saved in the „Updates" folder.
The current version can be obtained by email or in the internal access area of the E&P homepage
in the future.
74
NOTICE!
4102561_b
Publicité
