Publicité
en
Motor drive temperature too high
Event:
The temperature of the motor drive is too high.
Audio signal:
Acoustic signal 6x - repeated for 10 seconds
Corrective measures:
Allow the engine to cool down, wait at least 15 minutes and try again.
Pressure sensor
Event:
There is a problem with one or more pressure sensors.
Audio signal:
-
Corrective measures:
Reset the system by starting the engine for 15 seconds and switching
off the contact again, or pressing the leg retract button in the docking
station for longer than 8 seconds. Try to use the system again.
If the error persists, have the retailer check the pressure sensors and
sensor connections.
4102561_b
97
Publicité
