Publicité
en
9. Save the raised position with the "Save position" button, confirming with "Are you sure? > Yes".
As described above, the system will then automatically save the XY parameters for various tempe-
ratures and heats the levelling sensor accordingly. The levelling accuracy that can be achieved is
increased manyfold by this process; please wait until the system signals completion.
The system is now calibrated.
10.Exit the settings mode and check that it works correctly in automatic mode.
11. Check the ground clearance and the free gradient angle of the vehicle when fully loaded before starting
your journey. If the ground clearance and/or gradient angle cannot be achieved, measures to rectify
this must be taken.
These can be:
Installing additional air suspension or adjusting the existing suspension
Correcting the swing arm position for torsion spring axles
84
4102561_b
Publicité
