Introduction; Explanation Of Symbols; Declaration Of Ce Conformity - Solo 519 Instructions D'emploi

Introduction

Dear Customer,
Thank you for purchasing a SOLO scarifier. We hope
that you will get a lot of satisfaction from this modern
device. The SOLO 519 / 519-50 scarifier complies with
all the latest Directives and laws and will no doubt help
you to achieve an excellent quality of work. Before you
start using the machine, please take the time to read this
operating manual so that you understand how the
machine works and are fully familiar with all its functions.
The manual contains important information on safe and
proper operation of the scarifier. Please ensure that you
follow the recommendations, as this will help to avoid
hazardous situations, reduce repair bills and shorten any
time during which the scarifier is out of action. This will
also help to increase the reliability and service life of
your scarifier.
The laws in some countries state that the operating
manual is part of the machine and must be kept together
with the machine. If you decide to sell, hire out or lend
out the scarifier, please ensure that the operating
manual stays with it. The information and instructions in
the operating manual must be followed by every user.

Explanation of symbols

Symbol Meaning
Before use, read and follow the
operating manual and the safety
information.
Check all nuts, bolts and screws
and ensure they are securely
tightened
inspection intervals.
Toxic exhaust fumes. Do not use
in enclosed,
areas.
Hazard
expelled while the engine is
running – keep a safe distance.
Keep a safe distance from hot
surfaces.
Switch the engine off before
refuelling.
at the prescribed
non-ventilated
due to parts being
This also applies to anyone who repairs or transports
this device.
Never use the scarifier if any other persons
(particularly children) or animals are in the immediate
vicinity. The user is responsible for any damage or
harm caused to third parties.
In addition to the operating manual and the health
and safety regulations for the prevention of accidents
which apply in the country of use, the recognised
rules for safe and proper working must also be
followed.
supplemented with instructions in accordance with
national regulations for the avoidance of accidents
and for protection of the environment. To limit the
level of noise and exhaust gases you generate, never
leave the engine running unnecessarily. In some
countries you may need to comply with official quiet
periods, which may vary according to location.
Ongoing technical developments require continuous
modification of our scarifier in terms of design,
equipment and technology. We are under no
obligation to extend these modifications to scarifiers
which have already been delivered.
We hope that you enjoy using your SOLO 519 / 519-
50.

Declaration of CE conformity

Position
SOLO Kleinmotoren GmbH, Stuttgarter Straße 41,
D-71069 Sindelfingen, hereby declare that the
Chassis
supplied versions of the machines
Product name:
Series/type designation:
comply with the terms of the following EU directives:
EU Machinery Directive 98/37/EC and EU EMC
Directive 89/336/EEC (amended by 91/263 EEC and
Chassis
93/68 EEC),
Outdoor Noise Directive 2000/14/EG.
The following definitive standards were applied for
proper implementation of the requirements in these
Engine
EU directives: prEN 13684, EN ISO 14982.
The conformity declaration process 2000/14/EC was
carried out in accordance with Annex V.
Chassis
The measured sound power level is 94dB(A).
The guaranteed sound power level is 96 dB(A).
This declaration of conformity will be rendered null and
void if the product is modified or converted without
approval.
Engine
Sindelfingen, the 15.12.2005
SOLO Kleinmotoren GmbH
Engine
ENGLISH Page - 18 -
This operating manual
Petrol Scarifier
519 and 519-50
Wolfgang Emmerich
Managing Director
should be