Mondolfo Ferro TBE160 MATIC Manuel D'utilisation page 61

ATTENTION (for radio versions only)
Before starting with installation, make sure that no machines working with the same fre-
quency band are located within a radius of 200m from the selected installation spot.
In the case of interference, request a different frequency band.
WARNING
When choosing the installation spot it is necessary to respect the current regulations
on safety at work.
The machine must be installed on a stable and rigid floor to prevent and avoid any struc-
ture deformation.
Position the machine in a manner that guarantees access to all four sides. In particular,
check the minimum space required for the work indicated in Fig. 6:
- at the front for wheel loading and unloading;
- at the rear to be able to view the work being performed.
1500 mm
IMPORTANT: for correct, safe use of the equipment, users must ensure a lighting level of
at least 300 lux in the place of use.
CAUTION
If the machine is installed outdoors, it must be properly sheltered under a roof.
- E - Operator's manual
nGlISH
i
nStallation ClearanCeS
6
61