Introduction; Transport, Storage And Handling; Conditions For Transporting The Machine; Ambient Conditions For Storage And Transport - Mondolfo Ferro As 933 Manuel D'utilisation Et D'entretien

The purpose of this manual is to furnish the owner and operator of this Mondolfo Ferro machine with a set of practical
and safe instructions for the use and maintenance of the AS 933, AS 943 and AS 944 tyre changers.
Follow all the instructions carefully and your tyre changer will assist you in your work and give lasting and efficient
service in keeping with MONDOLFO FERRO traditions.
The following paragraphs define the levels of danger regarding the machine associated with the warning captions found
in this manual:
DANGER
Refers to immediate danger with the risk of serius injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before powering up the machine. Conserve this manual and all illustrative material
supplied with the machine in a folder near the tyre changer where it is readily accessible for consultation by the
machine operator.
The technical documentation supplied is considered an integral part of the machine; in the event of sale all relative
documentation must remain with the jack.
The manual is only to be considered valid for the machine of the model and with the serial number indicated on the
nameplate carried by the machine.
WARNING
Adhere to the contents of this manual: Mondolfo Ferro declines all liability in the case of actions
not specifically described and authorised in this manual.
NOTE
Some of the illustrations in this manual have been taken from photographs of prototypes; the standard production
model may differ slightly in certain respects.
These instructions are for the attention of persons with basic mechanical skills. We have therefore condensed the
descriptions of each operation by omitting detailed instructions regarding, for example, how to loosen or tighten the
fixing devices on the machine. Do not attempt to perform operations unless properly qualified and with suitable
experience. In case of need, please contact our nearest authorised Service Centre for assistance.
The tyre changer must be transported in its original packing and maintained in the position shown on the outer packing.
- Machine packing dimensions:
• width ....................................................................................... mm 1120
• depth ...................................................................................... mm 1000
• height .......................................................................................mm 970
- Shipping weight:
• STD version ............................................................................... kg 299
• T.I. version ................................................................................. kg 313
- Machine packing dimensions:
• width ....................................................................................... mm 1120
• depth ...................................................................................... mm 1000
• height .......................................................................................mm 970
- Shipping weight:
• STD version .................................................................................kg 285
• T.I. version .................................................................................. Kg 299
Temperature range from -25 to +55
WARNING
Do not stack other goods on top of the packing or damage may result.

INTRODUCTION

TRANSPORT, STORAGE AND HANDLING

Conditions for transporting the machine

Ambient conditions for storage and transport

AS 944 - AS 943
AS 933
24