Maintenance - Mondolfo Ferro TBE160 MATIC Manuel D'utilisation

MAINTENANCE

WARNING
The manufacturer declines all responsibility for
claims resulting from the use of non-original spare
parts or accessories.
WARNING
Unplug the machine from the socket and make
sure that all moving parts have been locked before
making any adjustments or maintenance work.
WARNING
Do not remove or modify any part of this machine
(except for assistance).
WARNING
Before removing unions or pipes, make sure that
the fluids are not pressurised. If pressurised oil
escapes, it can cause serious injury.
CAUTION
Keep the working area clean.
Never use compressed air or water jets to remove
dirt or residues from the machine.
When cleaning, take care not to create and raise
dust as far as possible.
To make your machine last longer and perform bet-
ter, it is recommended to:
- clean the turntable and the guide pins once a week
with environmentally friendly solvents;
- grease (Fig. 46 a-b-c-d-e) all the machine's moving
parts at least once a month;
- clean the filter cartridge approx. every 1500 hours
of operation;
- check the oil level in the control unit (see the
lubrication and greasing diagram) (B, Fig. 16) and
top up with oil if necessary, API CIS 32 or another
equivalent type (this check must be performed
with the cylinders "closed"): it is recommended
to replace the oil in any case after 1500 hours of
operation or once a year.
94 - English - Operator's manual
46a
46b
46c
46d
46e