Description Of The Console Controls - Mondolfo Ferro TBE160 MATIC Manuel D'utilisation

DESCRIPTION OF THE CONSOLE CONTROLS

The machines can be equipped with control
consoles applied on a control arm (A, Fig.
13) that is integral with the machine itself
or with a console applied to a floor-standing
manipulator (trolley type) (Fig. 13a) that is
connected to the machine with a cable.
If an accessory radio kit is applied, the ma-
chine with a control lever (trolley type) can
be operated via radio transmission.
A
VERSION WITH CONTROL MOUNT ARM (FIG. 14A)
1- Horizontal movement ➝ turntable trolley and tool trolley translation
Vertical movement ➝ raise and lower turntable arm
2- Button for selecting second speed setting for turntable trolley and tool trolley
translation
3- Vertical movement ➝ lower and raise tool unit
Horizontal movement ➝ turntable rotation
4- Vertical movement ➝ demounting position and tool search position
Horizontal movement adjust bead breaker disc inclination
5- Vertical movement with self-return ➝ automatic demounting control
6- Vertical movement ➝ set turntable rotation speed
7- Horizontal movement ➝ tool rotation
8- Vertical movement ➝ turntable open/close control.
Guard provided for preventing accidental contact
9- Bead-breaker disc plane dead-man switch
10- Tool plane dead-man switch
11- Function reset button
12- Wheel diameter setting buttons. Button 12a decreases value, button 12b
increases value
72
13
- English - Operator's manual
13a