Mondolfo Ferro TBE160 MATIC Manuel D'utilisation page 78

WARNING
If the machine malfunctions, retreat to a
safe distance and turn the machine's main
switch (A, Fig. 11) to 0 (Fig. 18).
WARNING
Make sure that the rim is correctly and
firmly locked on every gripping point of
the turntable clamp.
WARNING
Any operation intended to modify the
setting value of the relief valves is for-
bidden.
The manufacturer declines all liability for
damage resulting from tampering with
these valves.
The pressure should be reduced for weak or
particularly thin rims; for thick rims that are
difficult to demount, it is recommended to
adjust pressure to the maximum level.
Adjust the opening of the turntable using the
"closing/opening" control (C, Fig. 14) based on the
type of rim to lock (see examples in Fig. 19).
If the rim exceeds 44" in the locking point,
insert the extensions available as optional
accessory supplied on request (Fig. 20).
Position the wheel vertically on the machine
surface (Fig. 21).
78 - English - Operator's manual
17
18
19
20