Fulgor Milano FUTPO 6215 P TEM Instructions Pour L'installation Et L'utilisation page 47

Before using your oven for the first time remove all packing and
foreign materials from the oven(s). Any material of this sort left inside
may melt or burn when the appliance is used.
Error codes
This code appears in the event of the electronic control indicating a
fault. When the error appears, the current function is blocked. If the
type of error is related to a safety function, the oven becomes unusable
and every time a start attempt is made, the same error appears (in
which case call in the after-sales service), while if the error relates
to a minor fault, after being restarted the oven can be used for the
functions that do not involve the faulty part (e.g., a heating element).
Beeps
Confirms that the command has been received after a key has been
pressed.
It also indicates that a time function has been completed (e.g. Timer
or Timed Cooking). During the execution of a recipe, an acoustic
signal warns the user that the oven is waiting for operation by the
user (e.g., insert the dish or turn it over).
Beeps also signal an oven fault.
Door Lock
It's displayed steadily when the door is locked. The symbol flashes
when the latch is moving in order to lock or unlock the door. Do not
attempt to open the door at this time. Door can be opened when the
symbol no longer appears. A padlock appears when the door has
been locked automatically due to self-clean mode.
Power Failure
After the power returns to the oven, the door lock mechanism perform
a test run then the clock time and date are displayed .
Default Settings
The cooking modes automatically select a suitable temperature when
the cooking mode is selected, these can be changed when a different
one is needed.
F Failure Number Codes
These codes are displayed when the electronic control detects a
problem in the oven or in the electronics.
The error code is recorded in the Error Log in the Setup menu. This
error can be communicated to the service technician so he/she can
understand the possible cause of the problem in advance.
6 - General Oven Information
Locking the keyboard
Hold the key for 3 seconds. Commands are now locked and a "Key
icon" will be displayed.
Repeat the same operation for 3 seconds to unlock the keyboard.
NOTE: The power off operation is always available.
Preheat and Fast Preheat
Whenever a cooking mode is set and the oven is heating, the
preheating starts, during this period, the instantaneous temperature is
displayed together with the thermometer icon.
As soon as the 100% is reached, the control sounds an "end of
preheat" tone and the current temperature value disappears.
When it's necessary to heat up the oven rapidly, a Fast Preheat mode
is available: it uses the heating elements and the convection fan in a
special way, in order to reduce the heating time as long as possible.
After having set one of the cooking functions for which the fast preheat
is available and set the desired temperature value touch the
after entering the functions menu, select the icon
keys and confirm by means of the key
As soon as the set-point temperature is reached, the control sounds
a and both "Fast Preheat Icon" and "current temperature" disappear.
The oven switches automatically to the desired cooking mode that
was previously set: put the food inside now.
Timer
WARNING
The timer on your oven does not turn the appliance on or off,
its only purpose is to alert you through the buzzer. When you
want to turn off the oven automatically, use the end-of-cooking
or delayed cooking function.
NOTE Pressing the OFF button does not reset or stop the timer.
1. Press the button and set the desired time using the arrows
and confirm with the button
between hours and minutes use the arrows
2. The time can be set from 1 minute to 12 hours and 59 minutes
and, when set, the remaining time is always visible in the bottom
status bar until the time expires or is reset.
3. To change or cancel the time set, you must reset the timer by
pressing and holding the button
4. Timer format is usually HR:MIN, switching into MIN:SEC during
the last minute.
5. When the time expires, the display shows 00:00 and the buzzer
will sound for one minute or until the button
EN
key,
by means of the
.
. To switch the selection
.
for a few seconds.
is pressed.
9