Fulgor Milano FUTPO 6215 P TEM Instructions Pour L'installation Et L'utilisation page 42

3 - Installation of the Oven
EN
To install the oven into the kitchen a cutout should be made in
accordance with the dimensions shown in the Cutout & Dimensions
figure.
The apparatus is to be fastened to the top by means of the two
screws provided in the kit through the holes made on the oven
uprights.
WARNING
As the apparatus is to be fitted in your kitchen furniture, make sure
that all surfaces in contact with the oven can resist a temperature
of approx 90°C.
Electricals
Absorbed power:
oven top element:
oven bottom element:
round element (hot air):
roasting jack motor:
lamp:
hot air fan motor:
cooling fan motor:
Maximum absorbed power:
Supply voltage:
4
1200+1000W 230V
1200+1000W 240V
1 100W 230V
1 100W 240V
2300W 230V
2300W 240V
(on some models)
4W
(on some models)
25W
25W
25W
(see data plate)
(see data plate)
Respect for the environment
The documentation for this appliance is printed on paper bleached
without chlorine or recycled paper to contribute to protecting the
environment. The packaging was designed to prevent damage
to the environment; they are ecological products that can be
recovered or recycled.
Recycling the packing saves raw materials and reduces the volume
of industrial and domestic waste.
THE PACKING MATERIAL is 100% recyclable and marked with
the recycling symbol. Dispose of in conformity with local law. The
packing material (plastic bags, polystyrene parts, etc.) must be kept
out of the reach of children because it is potentially dangerous.
THIS APPLIANCE is marked in conformity with European Directive
2012/96/UE, Waste Electrical and Electronic Equipment (WEEE).
By making sure that this product is disposed of correctly, the user
contributes to preventing potential negative consequences for the
environment and health.
THE SYMBOL on the product or accompanying documentation
indicates that this product must not be treated as domestic waste but
must be delivered to a suitable collection point for the recycling of
electrical and electronic equipment.