Cub Cadet Pro Z 900 Serie Manuel De L'opérateur page 22

Standard set-up
Stems (Dandelion, Bahia,
Buckhorn, etc.)
Very lush &/or tall grass
Low cut height (1 to 2")
Mulch
Material collection
Abrasive (sandy), dry
Wet
Table Notes: This table is a general outline of suggested settings, mowing conditions may vary.
Inner Baffle: The inner baffle regulates grass discharge. Remove the inner baffle for high-volume grass and install the inner baffle for precision cutting.
Discharge Baffle: The discharge baffle enhances the grass discharge pattern. The discharge baffle reduces clumping and should be removed for mulching.
Cutting Blades: The cutting blades cut grass, create grass lift and discharge grass through the discharge chute.
Gauge Wheels: The gauge wheels reduce scalping, help with precision cutting and reduce turf defacement during turns.
Front Roller (if equipped): The front roller reduces scalping, helps with precision cutting and reduces turf defacement during turns.
Rear Rollers: The rear rollers reduce scalping and gives grass a striped appearance.
NOTE: To avoid damaging grass, no more than 1/3 of the grass height should be removed during a single cutting (i.e. if the grass is 6" tall, cut it to 4").
OPERATION
RECONFIGURABLE MOWER
Discharge
Inner Baffle
Baffle
Installed Installed
Removed Installed
Removed Installed
Installed Installed
Installed Removed
Installed Installed
Removed Installed
Installed Installed
Cutting Blades Gauge Wheels
Hi-lift Low = 3 to 5"
High = 1 to 2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to 2-1⁄2"
Hi-lift
Low = 3 to 5"
Low-lift High = 1 to 2-1⁄2"
High = 1 to 2-1⁄2"
Hi-lift/Mulch
Low = 3 to 5"
High = 1 to 2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to 2-1⁄2"
Low-lift
Low = 3 to 5"
High = 1 to 2-1⁄2"
Hi-lift
Low = 3 to 5"
22
Front Roller Rear Rollers
Low = 3 to 5" Low = 3 to 5"
High = 1 to 2-1⁄2" High = 1 to 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to 2-1⁄2" High = 1 to 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to 2-1⁄2" High = 1 to 2-1⁄2"
High = 1 to 2-1⁄2" High = 1 to 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to 2-1⁄2" High = 1 to 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to 2-1⁄2" High = 1 to 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to 2-1⁄2"
High = 1 to 2-1⁄2"
Low = 3 to 5"
Low = 3 to 5"