Good maintenance of the combustion engine is essential for the safe use of the machine, to do so
proceed as follows:
1.
Make sure the electric brake is engaged, otherwise engage it using the lever located at the left
rear of the machine (working direction).
2.
Check the main switch (1) is in the "0" position, if this is not the case, turn the key by a quarter of
a turn to the left, and remove the key from the instrument panel.
3.
Grasp the handle located on the side of the operator seat unit.
4.
Lift the operator seat unit until the safety clamp (2) is hooked.
WARNING: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
WARNING: With regard to the maintenance of the combustion engine, following the
instructions given in the user manual of the combustion engine (supplied with the
machine).
WARNING: Use the filler cap/dipstick (3) for the control of the engine oil level.
WARNING: Use the pipe (4) to change the engine oil.
MAINTENANCE OF THE COMBUSTION ENGINE
44
3
4