Publicité
Les langues disponibles
Les langues disponibles
10. Turn the latches (5) to secure the debris hopper to the body, turn the left latch clockwise and the
right latch counterclockwise.
11. Turn the key (4) of the main switch to "I" or "II", depending on the type of power source you want to use.
12. Take the machine to the designated machine storage place.
WARNING: Park the machine in an enclosed place, on a flat surface; near the machine
there must be no objects that could either damage it, or be damaged through contact
with it.
13. Rotate the key (4) of the main switch to the "0" position.
14. Remove the key from the controls instrument panel.
15. Grasp the handle located on the side of the operator seat unit.
16. Lift the operator seat unit until the safety clamp (7) is hooked.
17. Disconnect the electric system connector (8) from the battery connector (9)
ATTENTION: this process must be carried out by qualified personnel. An incorrect
connection of the connector may cause problems with machine functioning.
The adjacent figure shows the battery powered machine.
18. For Hybrid versions only, turn switch (10) on the combustion engine to the "OFF" position .
AT THE END OF WORK
35
8
9
10
Publicité
