Publicité
Les langues disponibles
Les langues disponibles
8. FRONT COMPONENTS
The front components of the machine are identified as follows:
1.
Storage compartment.
2.
Headlights.
9. SIDE COMPONENTS
The components on the side of the machine are identified as follows:
1.
Left side panel central brush engage/adjustment.
2.
Seat unit lifting handle.
3.
Right side panel central brush maintenance.
4.
Seat unit lifting handle.
10. REAR COMPONENTS OF THE MACHINE
The rear components of the machine are identified as follows:
1.
Debris hopper retainer.
2.
Debris hopper handle.
3.
Blinking light (optional).
11. BATTERY TYPE (B VERSIONS)
Power to the machine must be supplied by sealed traction batteries with gas recombination or gel
technology. OTHER TYPES MUST NOT BE USED.
The batteries must meet the requirements laid out in the norms: CEI EN 60254-1:2005-12 (CEI 21-5) +
CEI EN 60254-2:2008-06 (CEI 21-7)
The battery compartment can house two 12V batteries
For a good operating performance, we suggest the use of 105 Ah C5 batteries
MACHINE PREPARATION
13
Publicité
