WARNING: Use the machine until the battery is complete discharged.
WARNING: Never leave the batteries completely discharged, even if the machine is
not being used.
WARNING: If the machine is not used for a long period of time, perform a complete
charging cycle of batteries. Use a battery charger suitable for the batteries installed
both for the capacity and the type.
WARNING: Perform a complete charging cycle every ten cycles of full discharge of the
batteries. Use a battery charger suitable for the batteries installed both for the capacity
and the type.
To start working in hybrid mode, proceed as follows:
1.
Carry out all controls indicated in paragraph "PREPARING TO WORK (HYBRID VERSIONS)".
2.
Sit on the driver's seat.
3.
Turn the key (1) of the main switch until it is in position "II", in this case the type of power supply of
the machine is the combustion engine.
4.
At switch-on, three consecutive screens are displayed on the monitor. The first screen displayed
indicates the name of the machine.
5.
The second screen shows the total functioning time on the top line. On the bottom line, the battery
technology that has been set for the operation of the machine and the release of the program.
6.
The third screen displays the wording "START ENGINE"; perform all the procedures to start the
combustion engine.
6. WARNING: Following the instructions given in the user manual of the combustion
engine (supplied with the machine).
7. WARNING: The type of power with combustion engine is particularly suitable for the
cleaning of outside or well ventilated environments, where the exhaust gases of the
combustion engine would not be harmful.
8. WARNING: As soon as the engine speed is stabilized, move the throttle lever on the
combustion engine to maximize.
7.
The fourth and final screen called "work" displays the total operating time. The top line shows the
operating hours and minutes and the flashing symbol ":" Indicates that the hour meter is counting the
machine functioning time. The bottom line contains ten light indicators
WORK
29