Publicité
Les langues disponibles
Les langues disponibles
1. HANDLING OF THE PACKED MACHINE
The machine is contained in specific packaging with a pallet for the handling with fork trucks. The
packages cannot be placed on top of each other.
The total weight of the machine with its packaging is 950 lb (for TRIDENT SW24R BATTERY versions)
The total weight of the machine with its packaging is 640 lb (for TRIDENT SW24R HYBRID versions)
The dimensions of the packaging are as follows:
TRIDENT SW24R
A : 50 in
B : 40 in
C : 69 in
2. HOW TO UNPACK THE MACHINE
1. Remove the outer package.
2. Disengage the electronic brake, turn the lever (1) (on the rear right-hand side of the machine) clockwise.
3. The machine is fixed to the pallet with wedges which block the wheels.Remove the wedges.
4. Use a chute to get the machine down from the pallet, pushing it backwards.
ATTENTION: During transportation, the electrical brake should not be engaged, the
machine will in any event, if the critical speed threshold is crossed, activate the
internal braking system of the chopper circuit board and will emit a warning noise.
5. Keep the pallet for any future transport needs
WARNING: If the product is delivered in cardboard containers, handle the packed
product with suitable lifting means that comply with the legal requirements
WARNING: During this operation, check there are no people or objects near the
machine
3. HOW TO MOVE THE MACHINE
1.
Check that the central brush is lifted from the ground, otherwise lift it by moving the lever on the rear
of the steering column.
2.
Check that the side brush/es is/are lifted from the ground, otherwise lift it/them by moving the lever
on the rear of the steering column.
3.
Place it on a pallet using a chute.
4.
Check the main switch is in the "0" position, if this is not the case, turn the key by a quarter of a turn
to the left.
5.
Remove the key from the main switch.
6.
Secure the machine to the pallet using wooden wedges.
7.
Engage the electronic brake.
MACHINE PREPARATION
11
A
C
B
Publicité
