Hillyard TRIDENT SW24R Manuel D'utilisation Et D'entretien page 30

8. Lower the central brush until it is in contact with the ground, rotating the lever (2) clockwise.
9. Pressing the forward pedal (3), the machine will begin to move.
As soon the forward pedal is pushed, the motor of the central brush and the vacuum motor will start
working. The machine will now work at its maximum efficiency level until the batteries run down.
If the machine does not move and the control display shows "ELECTRO-BRAKE?" the electric brake has
to be engaged, using the lever on the rear left of the machine (work direction).
To lower the right side brush (1SL versions) or both side brushes (2SL versions) simply turn the right (4)
clockwise.
ATTENTION: Use the side brush or brushes (according to machine version) only on
edges, as it is not assisted by the vacuum action.
Deactivate the vacuum motor when you are about to clean wet or damp surfaces, to avoid ruining the
filter, and be careful not to operate the filter shaker while the vacuum motor is turned off. To turn off the
vacuum motor, press button (5) on the control handlebar.
WARNING: As soon as button (5) is pressed the control display shows the message
"VAC OFF". To re-activate the vacuum, press button (5).
Press the front flap-raiser pedal (6) when working with bulky waste, to allow the central brush to reach and
collect it.
WARNING: Do not hold the pedal for long.
WORK
30