Publicité
Les langues disponibles
Les langues disponibles
38.CLEANING THE DEBRIS HOPPER
Clean the debris hopper every week as follows:
1.
Make sure the electric brake is engaged, otherwise engage it using the lever located at the left
rear of the machine (working direction).
2.
Check the main switch (1) is in the "0" position, if this is not the case, turn the key by a quarter of
a turn to the left, and remove the key from the instrument panel.
3.
Turn the latches (2) in order to release the debris hopper, turn the left latch counterclockwise and
the right latch clockwise.
WARNING: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
4.
Grasping the handle (3) on the debris hopper, remove it from the machine.
5.
Clean the debris hopper under running water and remove any impurities.
6.
Grasping the handle (3) on the debris hopper, and assemble it on the machine.
7.
Turn the latches (2) to secure the debris hopper to the body, turn the left latch clockwise and the
right latch counterclockwise.
WEEKLY MAINTENANCE
40
Publicité
