Corghi A 9824 TI Manuel D'utilisation page 36

- Once the bottom bead is completely mounted,
repeat the same steps for the upper bead
(Fig.27).
- If you are working with aluminium alloy wheels,
external locking is recommended, using with the
supplied protection kit for the sliding clamps
(fig. 28) in order to avoid the risk of damaging
the wheel.
The sliding clamp protection kit must also be
used for external locking of 10" wheels.
9.7. APPROVED UHP AND RUN FLAT TYRE DEMOUNTING AND
MOUNTING PROCEDURE
For a detailed description of the UHP and RUN FLAT tyre mounting/demounting pro-
cedure, please refer to the instructions in the manual prepared by WDK (German Tyre
Industry Association).
9.8. TYRE INFLATION
9.8.a. SAFETY INDICATIONS
36
28
DANGER
27
A 9824 TI User Manual