Publicité
Les langues disponibles
Les langues disponibles
Model
400Volt/3ph 50Hz
200/230Volt/3ph 60Hz
200/230Volt/3ph 50Hz
200/230Volt/1ph 50Hz
A9824 TI
200/230Volt/1ph 60Hz
115Volt/1ph 50/60Hz
115Volt/1ph 60Hz
200/230Volt/1ph 50/60Hz DV
AIR MOTOR
The noise levels indicated correspond to emission levels and do not necessarily represent safe
operating levels. Although there is a relationship between emission levels and exposure levels,
this cannot be used reliably to establish whether or not further precautions are necessary. The
factors which determine the level of exposure to which the operator is subject to include the
duration of the exposure, the characteristics of the workplace, other sources of noise, etc. The
permitted exposure levels may also vary according to the country. However, this information
will enable machine users to make a more accurate assessment of hazards and risks.
1.2.e. AIR PRESSURES
The machine is equipped with an internal pressure limiting valve to minimize the risk of over
inflating the tyre.
1. Never exceed these pressure limitations:
• Supply line pressure (from compressor) is 220 psi (15 bar).
• Operating pressure (gauge on regulator) is 145 psi (10 bar).
Bead setting pressure (gauge on hose) is the tyre manufacturer's maximum pressure as stated on
the sidewall of the tyre
2. Activate air inflation jets only when sealing the bead.
3. Bleed air pressure system before disconnecting supply line or other pneumatic components.
Air is stored in a reservoir for operation of inflation jets.
A 9824 TI User Manual
Motor rating
• EXPLOSION HAZARD
• Never exceed the tyre pressure recommended by the tyre
manufacturer. Never mismatch tyre size and rim size.
• Avoid personal injury or death
Rotation
Torque
kW
speed rpm
0.75
8.5
0.75
8.5
0.75
8.5
0.75
8.5
0.75
8.5
0.55
11
0.75
8.5
0.75
6-15
/
6.5
DANGER
Weight of electric/
Nm
electronic part kg
1200
11.5
1200
11.5
1200
11.5
800
11.5
800
11.5
950
10
800
11.5
1200
10.2
800
/
17
Publicité
