Corghi A 9824 TI Manuel D'utilisation page 10

10. Electric Shock Hazard.
• Never hose down or power wash electric tyre changers.
• Do not operate the machine with a damaged power cord
• If an extension cord is necessary, a cord with a current rating equal
to or greater than that of the machine must be used. Cords rated
for less current than the machine can overheat, resulting in a fire.
• Care should be taken to arrange the cord so that it will not be
tripped over or pulled.
11. Risk of Eye Injury. Flying debris, dirt and fluids may be discharged
during bead seating and the inflation process. Remove any debris
from the tyre tread and wheel surfaces. Wear OSHA, CE or other ap-
proved safety glasses during mount and demount procedures.
12. Always inspect the machine carefully before using it. Missing,
broken, or worn equipment (including warning stickers) must be repaired or replaced
prior to operation.
13. Never leave nuts, bolts, tools or other equipment on the machine. They may become
trapped between moving parts and cause a malfunction.
14. NEVER install or inflate tyres that are cut, damaged, rotten or worn. NEVER install a
tyre on a cracked, bent, rusted, worn, deformed or damaged rim.
15. If a tyre becomes damaged during the mounting process, do not attempt to finish
mounting. Remove from the service area and properly mark the tyre as damaged.
16. To inflate tyres, use short bursts while carefully monitoring the pressure, tyre, rim and
bead. NEVER exceed the tyre manufacturer's pressure limits.
17. This equipment has internal arcing or sparking parts which should not be exposed to
flammable vapours (gasoline, paint thinners, solvents, etc.). This machine should not be
located in a recessed area or below floor level.
18. Never operate the machine if you are under the effects of alcohol,
medications and/or drugs. If you are taking prescription or over the
counter medication, you must consult a medical professional regard-
ing any side effects of the medication that could hinder your ability
to operate the machine safely.
19. Always use OSHA, CE or other approved and mandated Personal
Protective Equipment (PPE) during use of the machine. See your su-
pervisor for more instructions.
20. Remove jewellery, watches, loose clothing, ties and restrain long
hair before using the machine.
21. Wear non-slip safety footwear when operating the tyre changer.
22. Wear proper back support and employ a proper lifting technique
when placing, moving, lifting or removing wheels from the tyre changer.
23. This machine may only be used, maintained or repaired by properly
trained employees of your company. Repairs should only be performed
10 A 9824 TI User Manual