Initial Configuration - Palazzetti MULTIFIRE ARIA Notice D'installation

6.3 INITIAL CONFIGURATION

a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the
d) Press and enter the value "54" using the
e) Press
f)
g)
h) Press
seconds. Ignore this and switch the stove off using the safety switch on the rear, wait a few seconds
and switch it back on.
TWO DIFFERENT CONFIGURATIONS ARE AVAILABLE:
CONFIGURATION 1 (default)
The stove will module its power according to the room temperature read by the probe on the stove.
It is possible to set the function "Eco-mode" to allow the stove switch on or off according to the set
temperature.
CONFIGURATION 2
Nicolas
cod. 004771981 - 05/2015 - Palazzetti - PN - Italy
INSTALLATION
to go to the setup menu
buttons to scroll to and select submenu
and then press ;
[ 3 0 ] --0
; "
buttons;
buttons;
Fig. 6.3
43/144