Publicité
Les langues disponibles
Les langues disponibles
[:DC]?
:ACDC?
:HIGH?
:LOW?
:MAXimum?
:MINimum?
:ARRAY
:CURRent[:DC]?
:POWer[:DC]?
:VOLTage[:DC]?
OUTPut
[:STATe] 0|OFF|1|ON
:COUPle
[:STATe] 0|OFF|1|ON
:DOFFset <value>
:MAX
:DOFFset?
:DELay
:FALL <value>
:RISE <value>
:TMODE
:COUPle 0|OFF|1|ON
[:OFF] LOWZ|HIGHZ
:ON LOWZ|HIGHZ
:INHibit
:MODE LATChing|LIVE|OFF
:PON
:STATe RST|RCL0
:PROTection
:CLEar
:TEMPerature
:MARGin?
:WDOG
[:STATe] 0|OFF|1|ON
:DELay <value>
:RELay
:LOCK
[:STATe] 0|OFF|1|ON
SENSe
:AHOur
:RESet
:ELOG
Keysight RP7900 Series Operating and Service Guide
Takes a measurement; returns the averaged voltage.
Takes a measurement; returns the RMS voltage (AC + DC).
Takes a measurement; returns the High level of a voltage pulse.
Takes a measurement; returns the Low level of a voltage pulse.
Takes a measurement; returns the maximum voltage.
Takes a measurement; returns the minimum voltage.
Takes a measurement; returns the instantaneous current.
Takes a measurement; returns the instantaneous power.
Takes a measurement; returns the instantaneous voltage.
Enables or disables the output.
Enables or disables output coupling.
Sets a delay offset to synchronize coupled output state changes.
Returns the delay offset required for this instrument.
Sets the output turn-off sequence delay.
Sets the output turn-on sequence delay.
Couples the turn-on and turn-off settings (RP793xA, RP794xA)
Selects the output turn-off mode (RP793xA,RP794xA)
Selects the output turn-on mode (RP793xA, RP794xA)
Sets the operating mode of the remote inhibit digital pin.
Sets the output power-on state.
Resets the latched protection.
Returns the margin remaining before the over-temperature trips.
Enables or disables the I/O watchdog timer.
Sets the watchdog delay time.
Enables or disables the locked relay state of the SD1000A unit.
Resets the amp-hour or watt-hour measurement to zero.
1 Quick Reference
27
Publicité
