Publicité
Les langues disponibles
Les langues disponibles
Common Characteristics
Common Characteristic
Command Processing Time
Constant Dwell ARBs
Number of points:
Dwell range:
Dwell resolution:
Computer Interfaces
LXI:
LAN:
USB:
GPIB:
Environmental
Operating environment:
Temperature range:
Relative humidity:
Altitude:
Storage temperature:
Acoustic statement
(European Machinery Directive)
Digital Port
Max voltage rating:
Pins 1 & 2 as FLT:
Pins 1-7 as outputs:
Pins 1-7 as inputs:
Pin 8:
Keysight RP7900 Series Operating and Service Guide
≤ 1 ms from receipt of command to start of output change. Applies to simple settings commands over
the GPIB interface (see
Typical Command Processing
Up to 65,535
One dwell setting applies for the entire ARB, from 10.24 µs to 0.30 seconds
Values are rounded to the nearest 10.24-microsecond increment
LXI 1.5 LXI Device Specification 2016
10 Mb, 100 Mb, 1 Gb LAN
USB 2.0 (USB-TMC488 protocol)
SCPI - 1993, IEEE 488.2 compliant interface
Indoor use, installation category II (for AC input), pollution degree 2
0°C to 55°C (Maximum continuous current available is derated at 1% of rating per degree C from 40°C
to 55°C)
95% or less (non-condensing)
Up to 2000 meters
-30°C to 70°C
Acoustic noise emission
LpA 79 dB at Operator position
LpA 73 dB at Bystander position
LpA 61.4 at Idle fan speed
Normal operation mode per ISO 7779
+16.5 VDC/- 5 VDC between pins
Maximum low-level output voltage = 0.5 V @ 4 mA
Maximum low-level sink current = 4 mA
Typical high-level leakage current = 1 mA @ 16.5 VDC
Maximum low-level output voltage = 0.5 V @ 4 mA;
1 V @ 50 mA; 1.75 V @ 100 mA
Maximum low-level sink current = 100 mA
Typical high-level leakage current = 0.8 mA @ 16.5 VDC
Maximum low-level input voltage = 0.8 V
Minimum high-level input voltage = 2 V
Typical low-level current = 2 mA @ 0 V (internal 2.2k pull-up)
Typical high-level leakage current = 0.12 mA @ 16.5 VDC
Pin 8 is common (internally connected to chassis ground)
All Models
Times)
1 Quick Reference
55
Publicité
