Publicité
Les langues disponibles
Les langues disponibles
1 Quick Reference
1st Menu Level
2nd Level
TrigSource
Control
Protect
OVP
UVP
OCP
Inhibit
WDog
Clear
States
Reset
SaveRecall
PowerOn
System
IO
Groups
SDS
Preferences
22
3rd & 4th Levels
Specifies the transient and CD Arb trigger source
Initiates, triggers, and aborts transients; displays trig state
Configures over-voltage protection settings
Configures under-voltage protection settings
Configures over-current protection settings
Configures inhibit input mode settings
Configures output watchdog protections settings
Clears protection conditions and displays output status
Resets all instrument settings to the reset (*RST) state
Saves and recalls instrument settings
Selects the power-on instrument state
LAN
Settings
View the currently active network settings
Modify
Modify the network configuration
(IP, Name, DNS, mDNS, Services)
Apply
Applies the configuration changes and restarts unit
Cancel
Cancels the configuration changes
Reset
Performs an LXI LCI reset of LAN settings and restarts
Defaults
Resets the network to the as-shipped defaults and restarts
USB
Displays USB identification string
GPIB
Display or change the GPIB address
DigPort
Pins
Configures the individual digital port pins
Data
Reads/writes data to the digital port
Function
Specifies the primary/secondary function
Primary
Discovers and connects the primary to the secondary units
Secondary
Specifies the secondary address
Status
Returns the connection status of the SD1000A Safety Disconnect System
Config
Configures the connection to the SDS unit
Data
Input
Reads status data from the digital port of the SDS unit
Output
Sets the state of the external output signals of the SDS unit
Clock
Sets the real-time clock
Description
Keysight RP7900 Series Operating and Service Guide
Publicité
