Publicité
Les langues disponibles
Les langues disponibles
Control Board Disassembly
The Control board is located on the outside of the Constellation board. It must be removed to provide
access to the battery and the P600 board, which are both locate on the Constellation board.
1. As indicate below, first remove the two screws along the top of the Control board. Place the screws
in a container so that you do not lose them.
RP793xA
RP794xA
RP795xA
RP796xA
2. You can now lift the board out of its socket and move it to the side.
(When reassembling the Control board, don't forget to replace the insulator behind the board.
Keysight RP7900 Series Operating and Service Guide
7 Service and Maintenance
309
Publicité
