Télécharger Imprimer la page

Keysight Technologies RP7931A Guide D'utilisation Et D'entretien page 56

Publicité

Les langues disponibles

Les langues disponibles

1 Quick Reference
Common Characteristic
Regulatory Compliance
    EMC:
    Safety:
AC Input
    Phase and range:
    Frequency:
    Input VA:
    Input current per phase
        200 VAC input:
400 VAC input:
    Efficiency at full power:
    Power Factor:
Output Terminal Isolation:
Typical Weight
Dimensions
AC Input Efficiency, Power Factor, and THD
The following graphs provide additional details about AC input efficiency, power factor, and total
harmonic distortion over the entire power range of the instrument. Note that Highline voltages are 208
VAC and 480 VAC respectively. Lowline voltages are 200 VAC and 400 VAC respectively.
Source/Sink Efficiency RP7951A (200V/208V)
56
Complies with European EMC Directive for test and measurement products
Complies with Australian standard and carries C-Tick mark
This ISM device complies with Canadian ICES-001
Cet appareil ISM est conforme à la norme NMB-001 du Canada
Complies with European Low Voltage Directive and carries the CE mark.
Conforms to US and Canadian safety regulations.
Declarations of Conformity for this product may be downloaded from the Web. Go to
http://www.keysight.com/go/conformity
3 phase; 200 VAC nominal ±10%, and 208 VAC nominal ±10%
3 phase; 400 VAC nominal ±15%, and 480 VAC nominal ±10%
50/60 Hz
RP7951A, RP7961A: 6.5 kVA
RP7952A, RP7962A, RP7953A, RP7963A: 11.5 kVA
RP7951A: 17.3 A; RP7952A, RP7953A: 35 A
RP7961A: 8.66 A; RP7962A, RP7963A: 17.3 A
RP7951A, RP7952A, RP7953A: 86.3%
RP7961A , RP7962A, RP7963A: 91.5%
0.99 @ nominal input and rated power
During a 1-cycle line dropout the unit may reboot. The output will remain off after reboot until the
operator reinstates the previous settings, either by the front panel controls or using a computer
program. This behavior is consistent with safe operating procedures.
No output terminal may be more than ±950 VDC from any other terminal or chassis ground.
RP7951A, RP7961A: 60 lbs. (27.3 kg)
RP7952A, RP7962A, RP7953A, RP7963A: 70 lbs. (31.8 kg)
3U high; full rack width (see
Outline Diagrams
All Models
and click on "Declarations of Conformity."
for details)
Keysight RP7900 Series Operating and Service Guide

Publicité

loading