Publicité
Les langues disponibles
Les langues disponibles
[:POSitive]
[:IMMediate]
[:AMPLitude] <value>
:NEGative
[:IMMediate]
[:AMPLitude] <value>
:MODE FIXed|STEP|LIST|ARB
:PROTection
:DELay
[:TIME] <value>
:STARt SCHange|CCTRans
:STATe 0|OFF|1|ON
:SHARing
[:STATe] 0|OFF|1|ON
:SLEW
[:IMMediate] <value>|INFinity
:MAXimum 0|OFF|1|ON
[SOURce:]
DIGital
:INPut
:DATA?
:OUTPut
:DATA <value>
:PIN<1-7>
:FUNCtion <function>
:POLarity POSitive|NEGative
:TOUTput
:BUS
[:ENABle] 0|OFF|1|ON
[SOURce:]
FUNCtion
CURRent|VOLTage
[SOURce:]
LIST
:COUNt <value>|INFinity
:CURRent
[:LEVel] <value>{,<value>}
:POINts?
:DWELl <value>{,<value>}
:POINts?
:STEP ONCE|AUTO
Keysight RP7900 Series Operating and Service Guide
Sets the current limit when in voltage priority mode.
Sets the current limit when in voltage priority mode.
Sets the transient mode.
Sets the over-current protection delay.
Specifies what starts the over-current protection delay timer.
Enables or disables the over-current protection.
Enables or disables current sharing on paralleled units. (RP795xA, RP796xA)
Sets the current slew rate.
Enables or disables the maximum slew rate override.
Reads the state of the digital control port.
Sets the state of the digital control port.
Sets the pin function. DIO |DINPut |FAULt |INHibit |ONCouple |OFFCouple |TOUTput
|TINPut
Sets the pin polarity.
Enables or disables BUS triggers on digital port pins.
Sets the output regulation - voltage priority or current priority.
Sets the list repeat count.
Specifies the setting for each list step.
Returns the number of list points.
Specifies the dwell time for each list step.
Returns the number of list points.
Specifies how the list responds to triggers.
1 Quick Reference
29
Publicité
