Télécharger Imprimer la page

Keysight Technologies RP7931A Guide D'utilisation Et D'entretien page 64

Publicité

Les langues disponibles

Les langues disponibles

2 Installing the Instrument
Before Installation or Use
Inspect the Unit
When you receive your RPS unit, inspect it for any obvious damage that may have occurred during
shipment. If there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office
immediately. Refer to www.keysight.com/find/assist. Until you have checked out the unit, save the
shipping carton and packing materials in case the unit has to be returned.
Check for Items Supplied
Before getting started, check the following list and verify that you have received these items. If
anything is missing, please contact your nearest Keysight Sales and Support Office.
RP7900A Items
Remote sense cable for RP795xA.
RP796xA (installed)
Remote sense cable for RP793xA.
RP794xA (installed)
1.2
Digital connector plug
1.2
Primary/secondary cable
1.2
Input safety cover with bushing
1.2
Output safety cover
1
Sharing connector cable
1
Control safety cover
1
Ferrite core
1, 2
ESD cover with flange
Hardware Kits
    RP795xA. RP796xA
    RP793xA. RP794xA
Ferrite core for power cord
Calibration certificate
1 Parts are included in RP795xA. RP796xA Cover KIt, p/n 5066-1930.
2 Parts are included in RP793xA. RP794xA Cover KIt, p/n 5066-1935.
64
Description
High voltage cable with 2-pin connector for + and - sense
Sense cable with 2-pin connector for + and - sense
8-pin connector for the digital port
1 m cable (CAT6A) for Primary/secondary communication
Safety cover for AC input with strain relief bushing
Safety cover for high voltage output bus bars
Safety cover for high current output bus bars
High-voltage cable with 3-pin connectors for the sharing
port
Safety cover for current-sharing cable
Ferrite core installs on the current sharing cable
ESD cover for remote interface connections
Nuts and bolts for + and - high voltage bus bars
Nuts and bolts for + and - high current bus bars
For earlier models RP7961A, RP7962A, RP7963A
Calibration certificate referenced to serial number
Part Number
Keysight 5188-9516
Plug only: Phoenix Contact 1714278
Keysight 5190-4501
Plug only: Phoenix Contact 1952267
Keysight 1253-6408;
Phoenix Contact 1840421
Keysight 8121-2314
Cover only: Keysight 5066-1925
Bushing only: Keysight 1410-1901
Keysight 5066-1927
Keysight 5188-9544
Keysight 5188-9517
Plug only: Keysight 0360-3038;
Phoenix Contact 1840379
Keysight 5066-1926
Keysight 9170-2573
Keysight 5003-2364 - cover
Keysight 0515-1946 - screws
Keysight 5067-6031
Keysight 5066-1936
Keysight 9170-2578
None
Keysight RP7900 Series Operating and Service Guide

Publicité

loading