16
Factory settings
17
Disposal
17.1
Oils and lubricants
17.2
Water-glycol mixture
17.3
Protective clothing
17.4
Information on the collection of
used electrical and electronic
products
Installation and operating instructions • Wilo-Stratos GIGA, Wilo-Stratos GIGA-D, Wilo-Stratos GIGA B • Ed.01/2024-02
Menu no.
1.0.0.0
2.0.0.0
2.3.3.0
4.3.1.0
5.1.1.0
5.1.3.2
5.1.3.3
5.1.4.0
5.1.5.0
5.1.6.0
5.1.7.0
5.3.2.0
5.4.1.0
5.4.2.0
5.5.0.0
5.6.1.0
5.6.2.0
5.6.3.0
5.7.1.0
5.7.2.0
5.7.6.0
5.8.1.1
5.8.1.2
5.8.1.3
Table 34: Factory settings
Operating fluids must be collected in suitable containers and disposed of in accordance
with the locally applicable guidelines. Wipe up drips immediately!
The operating fluid complies with Water Hazard Class 1 of the German Administrative Reg-
ulation of Substances Hazardous to Water (VwVwS). When disposing of it, the locally ap-
plicable guidelines (e.g. DIN 52900 on propanediol and propylene glycol) must be observed.
Used protective clothing must be disposed off in accordance with the locally applicable
guidelines.
Proper disposal and appropriate recycling of this product prevents damage to the environ-
ment and danger to your personal health.
Name
Setpoints
Control mode
Pump
Base-load pump
Operating mode
Internal/External pump cyc-
ling
Pump cycling time interval
Pump enabled/disabled
SSM
SBM
External off
In1 (value range)
In2 active/inactive
In2 (value range)
PID parameter
HV/AC
Emergency operation speed
Auto reset time
Display orientation
Pressure value correction
SBM function
Pump kick active/inactive
Pump kick interval
Pump kick speed
en
Factory-configured values
•
Constant speed: approx.
60% of pump n
max
•
Δp-c: approx. 50% of
pump H
max
•
Δp-v: approx. 50% of
pump H
max
Δp-c activated
ON
MA
Main/standby operation
internal
24 h
Approved
Collective fault signal
Collective run signal
Collective External off
0–10 V active
OFF
0-10 V
see section "Setting the
control mode"
HV
approx. 60% of pump n
max
300 s
Display on original orienta-
tion
active
SBM: Run signal
ON
24 h
n
min
165