Wilo Stratos GIGA Notice De Montage Et De Mise En Service page 163

15.3.3 Error type C
1
2
3
4
5
6
7
8
Fig. 55: Error type C, flowchart
6.0.0.0
E000
6.0.0.0
- - -
3/6 S
6.0.0.0
300
5/6 S
6.0.0.0
0
6/6 S
Fig. 56: Acknowledging error type C
Installation and operating instructions • Wilo-Stratos GIGA, Wilo-Stratos GIGA-D, Wilo-Stratos GIGA B • Ed.01/2024-02
Program step/query
1
2
3
4
5
6
7
8
Table 31: Error type C
Acknowledging error type C:
•
To change to menu mode, press the operating button. Menu number <6.0.0.0> flashes on
the display.
•
Press the operating button again. Menu number <6.0.0.0> is displayed without flashing.
E000
The graphics show "- - -".
12.3
The units display shows the current incidence (x) as well as the maximum incidence of the
error (y) in the format "x/y". After 300 seconds, the figure for current incidence will increase
by one
E000
12.3
12.3
•
Wait until the remaining time is up.
If the current incidence (x) is the same as the maximum incidence of the error (y), the error
can be acknowledged manually.
•
Press the operating button again. The error is acknowledged, and the status page is dis-
played.
NOTICE
The error will be acknowledged automatically if the cause of the error is
eliminated.
Contents
• Error code is displayed
• Motor Off
• Red LED On
Error criterion fulfilled?
> 5 min?
• Error counter is increased
Error counter > 5?
• SSM is activated
Error acknowledged?
End; auto control resumes
Yes
No
en
163