Télécharger Imprimer la page

Miltenyi Biotec MACSQuant X Mode D'emploi page 83

Publicité

9
Technical data and specifications
The MACSQuant X is labeled as a protection class I device and must be plugged into a grounded power outlet.
Please note that for USA and Canada, the main power supply cord and plug of the instrument shall comply
with the following specifications: UL listed and KAM cord, minimum type SJ, minimum 18 AWG, 3 conductors.
Rated for a minimum temperature of 60 °C. Provided with grounding-type (NEMA 5-15P) attachment plug,
rated 125 VAC, 10 A. Opposite end terminates in IEC 320-style connector, rated 125 VAC, 10A.
Supply voltage fluctuations up to +/– 10% of the nominal voltage. Transient over-voltages present on the
mains supply: category II. The instrument is suitable for pollution degree 2 environments.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
l
Increase the distance between the equipment and the receiver.
l
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
l
Consult the dealer or an experienced radio/TV technician for help.
l
Changes or modifications of the instrument, unless expressly approved by Miltenyi Biotec, may void your
authority to operate the instrument pursuant to FCC 47 CFR.
For other safety considerations, refer to the product label or visit www.miltenyibiotec.com.
Design and specifications are subject to change without notice.
9
81

Publicité

loading