Publicité
7 Remove the protective cap and connect a hydrophobic air filter to the appropriate connector of the fluidics
system on the front of the instrument.
2.7
Install the Single tube rack
The instrument is delivered with the Single tube rack. The Single tube rack is compatible with standard 5 mL
flow cytometry tubes or 1.5 mL and 2 mL microcentrifuge tubes.
1 Gently insert the Single tube rack into the corresponding slots located at the front of the instrument.
2 To remove the Single tube rack, hold it between two fingers and pull gently.
2.8
Install the MACSQuant X Orbital Shaker
Refer to the MACSQuant X Orbital Shaker user manual for details on its installation.
2
55
Publicité
