Publicité
2.9
Connect the instrument to the power supply
1 Connect the power cord to the power socket at the rear side of the instrument. The main power switch is
located on the right side of the instrument. Ensure that the main switch is in position O (off) before
connecting the power cord.
2 Attach the cable coming from the 2D code reader to the port labeled RS232/BCR at the rear side of the
instrument and fasten securely.
3 Plug in the power cord to a grounded power outlet.
4 Use the main switch on the right-hand side of the instrument to switch the instrument to standby mode.
5 Tap the screen to start the MACSQuantify Software.
6 Wait until the MACSQuantify Software is loaded completely. Connect the keyboard included in the delivery.
Connect a mouse if desired.
2
2.10
Install the webcam
1 Attach the magnetic webcam holder to the side of the instrument.
2 Plug in the webcam cable into a free USB port at the rear side of the instrument.
3 Place the webcam into its holder.
4 The webcam is recognized automatically.
Unplug the webcam during normal operation of the instrument. Use it only during a Live support session.
56
Publicité
