Télécharger Imprimer la page

Truma Mover XT4 Mode D'emploi page 30

Masquer les pouces Voir aussi pour Mover XT4:

Publicité

Les langues disponibles

Les langues disponibles

Product description
system comes to an imediate standstill for safety re-
asons if radio frequency interference occurs. It is im-
possible for other radio signals to set the manoeuvring
system in motion.
Fig. 6
ON / OFF
Switch on / switch off (slide switch on the
side)
SLIDE CONTROL
Drive forward and in reverse
CONTROL KNOB
Drive to the left (in an anti-clockwise di-
rection) and to the right (in a clockwise
direction)
ENGAGE
Drive rollers engaged
DISENGAGE
Drive rollers disengaged
4.5.2 The remote control's symbols and acoustic
signals
Symbol
Colour Meaning
Red
Warning – power supply / Mover
battery's charging status
Yellow
Short-term malfunction or
warning
Red
Continuous fault
Green
Radio connection status
Sym-
Display
bol
Switch on and normal operation
30
EN
Meaning
Sym-
Display
bol
Flashes slowly
Lights up
continuously
Flashes rapidly
with acoustic
signals
Flashes slowly
Flashing with
acoustic signals
Switch on, special process
Lights up
Flashes with
acoustic signal
Sym-
Display
bol
No button is pressed on the remote control for some
time
Flashes rapidly
with acoustic
signals
Mover XT4
Meaning
Once the remote control
is switched on, the radio
connection is established
(this takes approx. 5 se-
conds). Wait until the data
link is stable
Remote control and con-
trol unit are ready for ope-
ration, data link stable
If a data link has not been
established after 10 se-
conds, the remote control
switches off. The control
unit may not be switched
on, or the 13-pole plug
may not be plugged into
the safety socket
During engagement and
disengagement, 1 acou-
stic signal indicates the
start of the process, and 2
acoustic signals indicate
the end of the process
Radio connection was in-
terrupted. Reduce the dis-
tance between the remote
control and caravan (or
remedy the malfunction)
and switch the remote
control back on again.
The last engagement or
disengagement was not
completed:
Operation is only possible
when engagement or di-
sengagement is repeated.
Activate engagement or
disengagement and wait
until it is complete.
Meaning
The remote control swit-
ches off
60020-00216 00 08/2022

Publicité

loading