Truma Mover XT4 Mode D'emploi page 25

Mover XT4
1 About these instructions
These operating instructions form part of the product.
Always keep the operating instructions in the
vehicle.
Make the safety instructions accessible to other
users too.
1.1 Document number
The document number of these operating instructions
is printed on each inside page in the footer and on the
back.
The document number consists of
Article number (10 numbers)
•
Revision status (2 numbers)
•
Publication date (month/year)
•
1.2 Validity
These operating instructions apply exclusively to the
Mover XT4.
1.3 Target group
These operating instructions are aimed at users.
 Gender-specific language has not been used to im-
prove legibility. Corresponding terms apply to people
of all genders in the interests of equal treatment.
1.4 Symbols and displays
Symbol Meaning
Warning of hazards for people
Technician
Additional information to help with under-
standing or optimising work processes.
Symbol for an action step.
Something has to be done here.
*
Optional parts
Reference to an image
(Fig. 3-1)
E.g. Figure 3 – number 1
60020-00216 00 08/2022
1.5 Warnings
Warnings are used in these operating instructions to
warn of property damage and personal injury.
Always read and observe warnings.
Warning word Meaning
Hazards for people.
Risk
Failure to observe this information
will lead to fatal or severe injury.
Hazards for people.
WARNING
Failure to observe this information
will lead to fatal or severe injury.
Hazards for people.
CAUTION
Failure to observe this information
may lead to minor injury.
Information about preventing pro-
NOTICE
perty damage
The installer or vehicle owner must apply the yellow
sticker with the warning information, which is enclosed
with the appliance, in a location in the vehicle where it
is clearly visible to all users (e.g. the wardrobe door).
Missing stickers can be requested from Truma.
1.6 Abbreviations and glossary
Word Meaning
Light-emitting diode
LED
ABE General operating permit
1.7 Supplied
Operating instructions on the functionality of the ma-
•
noeuvring system with associated safety instructions
ABE
•
Installed manoeuvring system including remote con-
•
trol for controlling the manoeuvring system
20 mm spacer plate for regularly checking the gap
•
between tyres and drive rollers
If available: battery cut-off switch for establishing /
•
disconnecting the power supply to the entyre system
Hexagonal socket spanner for manual emergency
•
disengaging of the drive units
1.8 Accessories
Power Set BC
About these instructions
EN 25